100% Original Russian Quality Splav Kayak Single Boat "wasp (Osa)" Up To 160 Kg

100% Original Russian Quality SPLAV Kayak Single Boat "WASP (OSA)" UP TO 160 KGBrand new condition of original Russian item! Manufacturer: SPLAV Ltd., Russia The boat consists of two independent side and one Central (bottom) of cylinders of air-tight PVC fabric, density 650 g/m high pressure valves. To the bottom of the cylinders glued to the bottom of the same material. Along the Central axis of the bottom glued protective Leia from durable PVC 60 mm, covering the bottom of the bottom cylinder. The upper part of the boat closes the deck is made of awning fabric PVC with a density of 630 g/m.On the deck is an oval hole for planting rower.

Around the perimeter of the oval hole glued tape made of PVC fabric, with sewn to it a nylon strip with a cord that allows you to attach the oval Hoop (collapsible, two scasta). Rower has the opportunity to wear this wrap skirt for protecting the cockpit of the boat from water ingress and spray.On deck glued two handles, and 12 metal half-rings for attaching strapping and additional cargo on deck.The kit of the boat includes a hard seat (the Bank), moisture resistant plywood coated with polyurethane. The Bank moves forward and backward along the guide rails glued to side cylinders and is tapered from the stern. Behind the oarsman, under the Hoop of the cockpit has a metal cross strut does not allow the on-Board cylinders to curl up inside.To the side cylinders inside the cockpit, glued the washer for mounting the femoral end stops (40 mm straps, with adjusting buckle), and nickels have a built-in strap 25 mm for pipe mounting of the heel stops (stops stops) with two adjusting buckles.On the transverse strut can dress back (optional, not included as standard). The backrest is attached to the two half-rings glued to the hull cylinders, plastic carbines with core sewn to the adjustment straps.On deck, in the bow and stern, it is possible to frame technological hatches, allowing to place in hard to reach areas of the small cargo, and increasing the ease of loading in the cockpit of germophobic (optional, not included as standard).

Length: 360 (+/- 1) cmWidth: 81 (+/- 1) cmWeight: 10.8 kgCapacity: 160 kgDiameter of side cylinder (max): 23 cmThe diameter of the bottom cylinder (max): 13 cmThe size of the cockpit wrap: 48×76 cmDimensions Packed:125×26×26 cmThe color of the cylinders and heads: greyDeck color: green (light green), yellowSingle inflatable kayak "OSA-1" designed for travel on calm rivers and lakes, as well as, to alloy at the flood ( category A-) and rapids ( 1-3 category) rivers.Thanks to the keeled bottom and a closed cockpit, the boat is as close to a frame-inflatable and hybrid (inflatable elements of the frame) kayaks, and much larger than most inflatable counterparts in speed, has good maneuverability, adequate stability, keeps well on course. The absence of rigid elements allows to keep intact the shell when hitting the rocks and logs.Note that the internal volume under the rig allows you to make hikes of the day (1-3 days) without securing cargo on top of the soundboard. For stand-alone travel length up to 2-3 weeks on the deck of the boat there is a washer under germophobe up to 100 liters. Standard features include:BoatWrap cockpitThe Bank (seat)The transverse strutAn adapter for valves for pumpValve keyTube heel lockThe straps of the thigh stops — 2 PCs.Compression straps for the packing of the boat — 2 PCs.Scraps of fabric cylinders/bottoms and decksBefore using the boat make sure all cylinders are pressure the same. It is recommended that after the descent of the boats into the water in a few minutes to get her out of the water and again to pump.

Note: never leave the boat inflated for long periods of time under the sun, if the cylinders are not immersed in water.Before packing the boat after use, it is recommended to clean it from dirt, wipe dry, shake out of the cockpit sand and debris. Pump cylinders of excess air. The cylinder valves are preferably closed by a cover (if your pump has the function of pumping). When folding, make sure that the cylinder valves and noses the boat did not fall on top of each other, otherwise, package will not work compact. The boat rolled tighten the compression straps.Before storing the boat you need to pump up and dry completely (to avoid odor) and clean inside the remaining sand with a vacuum cleaner.If the boat was damaged (puncture, laceration), use repair patch from scraps of the original tissue included in the package.Recommended (in field conditions) adhesive for the repair: polyurethane glue "Moment-crystal".

Follow the instructions for use available on the tube of glue. Note: the glue is a limited shelf life, watch this, going on a hike. In the event of a serious injury (long cut of a cylinder) should be referred to a specialist for repair.Handle carefully with the Hoop of the cockpit, remember that he has docking stations that can break when used carelessly. It is prohibited to raise loaded the boat for the wrap, use regular handles as well as (if necessary) to the Bank or the belt stops.To protect the bottom of the holes it is recommended to lay the pieces of polyurethane foam (under the heel is a must). You can buy them with the boat (optional, not included as standard).Additional options, and additional (individual) the colors of the deck You can order from the manufacturer.

The period of manufacture boats to order: 5 working days. The instructions for Assembly/disassembly of the boat: To remove the compression straps to deploy the package.Install rails on the Bank (seat). Note: the Bank has a narrowing at the stern side, on this side it is easier to insert.Install transverse brace, secure it tied to the tube pins.Pump pump bottom and the cylinders. Note: the valve core with the spring needs to be moved to closed status (spring pressed). Cover valves cover plug.To assemble the Hoop of the cockpit and install it, with tucked under his cloth and tightening cord.To adjust parameters under its belt tension calcaneal and femoral stops.The boat can be used.Disassembly is in the reverse order.Before folding the boat to blow away the remaining cylinders with air through the check valve of the pump (if available).

Note: the core valve when deflation is in the open position (spring compressed), and after detaching the nozzle of the pump, it must quickly move to the closed position so that the cylinders are not scored air back. So packing will be more compact. If your pump is not provided the check valve, then to fold the boat should open cylinder valves.______________________________________ We sell other colors and types of this product, as well as many other tactical products. If You can't find something, please contact us and we will find it for You on the Russian market. Please contact us and we'll be happy to assist you!

ATTENTION! The value of each of our items already include shipping Worldwide. Let us know if you want to buy not one, but several of our lots and save on shipping and we will combine for you items in one set and recalculate the shipping cost! ATTENTION! When buying a product we have marked "Made in Russia" you can be sure that this product is original and physically made in Russia with quality control, not in China!

______________________________________Buy Now, don't miss out on this incredible deal! "I always leave appropriate feedback and expect the same courtesy in return"I have constant access to various goods from Russia, don't hesitate to ask me, I will try to help you find what you want.Don't forget to look my other items Here ______________________________________ Terms and ConditionsWe accept only PayPal payments;Item will be sent to buyer's classifieds board shipping address only;We ship out packages same business day of receiving the payment (if the description is not specified other terms). We ship from Smolensk (Russia) by Standart or Expedited registered mail with tracking number (tracking by USPS etc.);Since it is international shipping, delivery time is about 14-30 business days. To some countries or rural areas, it may take even longer time due to less frequent of airline and inspection across the border;Import duties, taxes, and charges by customs and/or shipping agent are not included in the price. These charges are the responsibility of the buyer.

Please check with your local customs office for more details;Once you receive your goods, please inspect them for any damage during transit, and report the said damage within 24hrs via e-mail. If all is well please leave feedback, so we are aware that you have received your goods. Please note that if there are any problems, contact us first via e-mail giving full details of any problem along with your user ID;If you are not happy with your purchase for whatever reason you can contact us for a replacement/refund instruction;Customer satisfaction is what we depend on to succeed. Therefore, your feedback is extremely important to us. Please contact us BEFORE leaving any negative feedback or open a case, we will solve the problem until you are fully satisfied.